Pressure Bypass Valves-manufacture,factory,supplier from China

Pressure compensation range: 0.08-0.4MPa, emitter specification and flow: 4L/h, 8L/hPerformance characteristics:When the system pressure changes from 0.08 to 0.35Mpa, the flow of the emitter remains unchanged, and the uniformity of irrigation can reach more than 98%.Features of use:The installation on the construction site is suitable for any spacing of crops. PE water pipe can be buried below the ground.

Pressure compensation range: 0.08-0.4MPa, emitter specification and flow: 4L/h, 8L/hPerformance characteristics:When the system pressure changes from 0.08 to 0.35Mpa, the flow of the emitter remains unchanged, and the uniformity of irrigation can reach more than 98%.Features of use:The installation on the construction site is suitable for any spacing of crops. PE water pipe can be buried below the ground.

16mm double lock-nut bypass valve and double thread bypass switch are made of high-quality engineering plastics. The products are of high quality and durable. This kind of drip irrigation bypass switch adopts double thread form with tight connection, good water locking effect and no water leakage.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

The red adjustable flow dripper can also be called the 8-hole red little red cap dripper. The 8-hole red little red cap dripper can be adjusted to sprinkle, drip, and close. Adjust to the left to close, adjust to the right to adjust the water flow. The water outlet distance is determined according to the water supply pressure.

The pressure compensation drip irrigation pipe is made of high-density PE pipe with improved nanotechnology and built-in pressure compensation emitter. It is suitable for complex terrain and has the characteristics of good uniformity, strong anti-clogging ability and long service life.The commonly used model of pressure compensation drip irrigation pipe is Φ16. The distance between the emitters is 300mm (200), the wall thickness is 0.6mm, 0.8mm and 1.0mm.

Usage: first, use special puncher to punch holes on the side of soft water tape, then rotate the bypass valve of the product into the hole of soft tape, tighten the screw to fix the bypass valve on the soft water tape, and connect the drip irrigation tape on the other side.

Product features: soft tape bypass valve has its own valve, which can control and adjust the flow of each drip irrigation tape at will.Precautions for installation: 1. mainly used for connection of main water tape, PE water tape(wall thickness 0.6-1.6mm), etc.2.The fittings of this specification are connected between the soft drip irrigation tapes with inner diameter of 16mm.

Lock-nut bypass parameterNameLarge hole lock-nut bypassSpecifications16-16mm  12-16mmPackageBaggedQuantity2000 pieces/ bagSales modelWholesale, agencyMaterialSpecial materials have strong aging resistanceApplicable conditionsThe main pipes are PE irrigation pipe and PVC irrigation pipe

The 360 degree pressure-compensated ground-inserting fountain sprinkler is made of new PP material with antioxidants and anti-ultraviolet additives, which is resistant to aging and has a long service life. There are 8 water outlets on the top of the pressure-compensated ground-inserting fountain sprinkler, which form a spraying-shape. It has pressure compensation function, and doesn't need manual adjustment. It can spray water evenly under different pressures.

Instructions for use: Mainly used for capillary head end control (the right end of the pull ring is connected to a 16mm drip tape, which is fixed by the pull ring; the left end is connected to the water delivery main pipe, which can be used for PE pipes (wall thickness greater than 1mm), water delivery tape or use with matching rubber bands , Connect with pvc pipe.)Product introduction: The pull-ring bypass switch is a commonly used drip irrigation switch.

There are two types of drip irrigation tape lock-nut bypass produced by our factory, one is 12-16mm reversed lock bus bypass, the other is 16-16mm reversed lock-nut bypass. Generally, users call this kind of reversed lock-nut bypass as drip irrigation tape lock-nut bypass. 16-16mm lock-nut bypass is also called large hole lock-nut bypass or large body lock-nut bypass. Because both ends are 16mm diameter, this large hole lock-nut bypass is a kind of bypass that is more commonly used in lock-nut pipe fittings.

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.1-0.2flow (Lh)40.50spraying radius (m)12-15

Suitable occasions: suitable for various terrain and crops, especially in irrigation area with large slope fluctuation; Suitable for the case where the laying length of drip irrigation pipe is large; Suitable for the emitter spacing changes; When the system pressure is unstable.

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.22-0.2824-331.0-1.5

Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseSimple atomizing micro-sprinklerWorking pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.3601.0-1.5

Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.

The net filter is suitable for the irrigation of vegetables, fruit trees, greenhouse, flowers, tea garden, green land and various crops in the field. It can save water, save energy, improve plant quality, improve product grade, maintain ecological balance and benefit the country and the people. It is a necessary irrigation product for the transformation from traditional agriculture to modern agriculture.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

The net filter is a kind of precision equipment which uses the filter screen to directly intercept impurities in water and oil and other liquids, removes suspended matter and particles in water and oil , reduces turbidity, purifies water quality and oil quality, reduces the generation of system dirt, bacteria, algae and rust, etc., so as to purify water quality, oil quality and protect other equipment in the system.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

Performance characteristics:When the system pressure changes in the range of 0.05-0.35Mpa, the outflow remains unchanged, and the uniformity of irrigation can reach more than 98%; For larger trees, annular drip irrigation pipes should be installed at the outlet of the current stabilizer to ensure that the trees can be irrigated all around; the bidirectional anti-clogging design of the shunt pipe can ensure the long-term stable movement of the equipment undergroundSteady flow - small pipe outflow irrigationPressure range: 0.05-0.4Mpe; Flow specification: 10L/:20L/h.

The net filter is a kind of precision equipment which uses the filter screen to directly intercept impurities in water and oil and other liquids, removes suspended matter and particles in water and oil , reduces turbidity, purifies water quality and oil quality, reduces the generation of system dirt, bacteria, algae and rust, etc., so as to purify water quality, oil quality and protect other equipment in the system.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

The net filter is suitable for the irrigation of vegetables, fruit trees, greenhouse, flowers, tea garden, green land and various crops in the field. It can save water, save energy, improve plant quality, improve product grade, maintain ecological balance and benefit the country and the people. It is a necessary irrigation product for the transformation from traditional agriculture to modern agriculture.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

Drip irrigation : The inlaid drip irrigation pipe is an integrated drip irrigation pipe with a cylindrical dripper embedded on the inner wall of the pipe. The dripper is assembled on the inner wall of the pipe while producing the pipe, which is easy to install and use.Classification1. According to the water outlet method, it is divided into:Pressure Compensated Drip Irrigation Pipes and Non-Pressure Compensated Drip Irrigation Pipes2. According to the structure can be divided into:In-line drip irrigation pipe and inter-pipe drip irrigation pipeapplicationApplicable conditions:1.

Product introduction: the pull ring bypass switch is a common drip irrigation switch, one end of which is connected with the main water tape or PE pipe, and the other end is connected with the drip irrigation tape, so as to achieve the effect of controlling the water flow in the rear section of the valve.Instructions for use: it is mainly used for controlling the head end of the capillary (the right end of the pull ring is connected with a 16mm drip irrigation tape, which is fixed by the pull ring; The left end is connected with main water delivery pipe, which can be used for PE pipe (wal