Ground-inserting fountain sprinkler-manufacture,factory,supplier from China

Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needs.Inserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler. At the same time, it can maintain a certain height of the sprinkler from the ground.

FeaturesColor: As the pix shown.Material: ABS, plastic.Premium quality - 3 arm + ABS plastic rotary garden sprinkler with Ground Rod.Effective water sprinkler irrigation machine - patented layout of water-saving tool may be centered to keep water maximum with the aid of using adjusting the water density, length and scope.Easy use - join water joint to the connector and tap.Long spray distance - as much as 26ft-32.8ft distance with worldwide general pipes.Different spray direction - direct or forty five degree.Spraying distance: upward 2.5-3m, lateral 4-5m Connection length: half of Inch M

Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mCommon overall performance trends:The structure layout is cheap, whilst the water strain is small, it can also irrigateIt is appropriate for irrigation of fruit tree, shrub nursery, narrow garden and special flora, irrigation and cooling of greenhouse plantsThe rotary sprin

Subsurface drip irrigation structures follow water immediately to the crop root quarter thru buried plastic tapes with embedded emitters.The essential advantage of us structures is their water-use efficiency, in comparison to sprinkler irrigation or furrow irrigation structures. Because drip tapes are buried at approximately 12 inches beneath floor floor (this will range relying on soil kind and crop) and the soil floor remains dry, water loss because of evaporation and runoff are minimized.Another massive benefit of us is its flexibility to irrigate irregular-fashioned fields.

One. Definition of current stabilizerThe stabilizer is composed of the upper part, the lower part, and the pressure compensation gasket, the lower part is the water inlet part, the upper part is the water outlet part, the upper part has the pressure compensation flow channel.Two.the characteristics of the current stabilizer1. The current stabilizing device is adopted, and the length of laying on the ground is more than 100 meters.2. The flow is stable and the uniformity reaches 90%.3. Strong resistance to plugging.4. Can be buried deep underground, does not affect the ground work.5.

1. The effective utilization rate of water is high. Under the condition of drip irrigation, the irrigation water wets part of the soil surface, which can effectively reduce the ineffective evaporation of soil water. At the same time, because drip irrigation only moistens the soil near the roots of the crops, and the soil moisture content in other areas is low, it can prevent the growth of weeds. Third, the drip irrigation system does not generate ground runoff, and it is easy to grasp the precise watering depth, which is very water-saving.2.

With the continuous maturity of technology, more and more irrigation equipment is used in farmland irrigation. Among them, drip irrigation belt and micro-sprinkler belt are the most used irrigation tools. Although the names of these two kinds of irrigation equipment are similar, they are two kinds of irrigation equipment.

Major motive:While it's miles set up upside down, it is used for cutting seedling cultivation in the greenhouse and temperature manipulate. the project fee is incredibly low.Used for temperature manipulate of greenhouse or rooster farm.Technical parameters of go atomizing sprinkler: drift charge 35l/h, variety zero.7m

In recent years, there are a variety of popular orchard irrigation methods, such as immersion irrigation, manual irrigation, water-saving irrigation, high-level sprinkler irrigation, and simple sprinkler irrigation. However, these technologies all have their shortcomings more or less. The cost of immersion irrigation is high, and the cost of manual irrigation is high. The effect is relatively poor. Water-saving water-saving irrigation has low one-time investment, high water-saving efficiency, simple maintenance in the later stage, and high-level sprinkler irrigation.

Compared with the dripper, the most obvious feature of the pressure-compensated dripper is:1. The pressure compensation dripper can make the elastic silicone sheet change the section of the water outlet with the help of water conservancy pressure, automatically adjust the flow rate, and make the water output uniform;2. The pressure compensation performance is strong, and the automatic control water dispenser is the best choice. It is especially suitable for undulating terrain, unbalanced system pressure and need to increase capillary.How to choose a pressure compensation dripper?1.

Offer amazing insulation. tube protects the, metallic, cable, wood and and many others towards to quick circuit, corrosion, oxidation, decay, abrasion, fracture and and many others. software location; can used for sealing reason of power, facts, telecom cables and automotive, digital, plane, train, subway, port etc.

Pressure CompensationThe amount of pressure that flows through a drip irrigation system can fluctuate, depending on hose length and garden bed elevation, among other factors. This can cause emitters to flow differently than designed, with more or less water flow depending on pressure.To combat this, the best drip irrigation system emitters are pressure compensating by design. They’ll emit the same amount of water regardless of the pressure at their inlet (where they attach to the main hose).