Pressure compensation range: 0.08-0.4MPa, emitter specification and flow: 4L/h, 8L/hPerformance characteristics:When the system pressure changes from 0.08 to 0.35Mpa, the flow of the emitter remains unchanged, and the uniformity of irrigation can reach more than 98%.Features of use:The installation on the construction site is suitable for any spacing of crops. PE water pipe can be buried below the ground.
Liên hệ ngay
Drip irrigation dripper characteristics1. Silicone sheet inside the dripper can change the section of the water outlet, realize the effect of stable water flow and flow regulation. It can be installed on fruit trees, saplings and forest trees with a relatively long distance, and the distance between the drippers can be adjusted arbitrarily according to the distance between crops. Suitable for various terrains such as plains, mountains, plateaus, terraces, hills, etc.2. The dripper has a small volume, so it is easy to install.
Liên hệ ngay
Pressure compensation range: 0.08-0.4MPa, emitter specification and flow: 4L/h, 8L/hPerformance characteristics:When the system pressure changes from 0.08 to 0.35Mpa, the flow of the emitter remains unchanged, and the uniformity of irrigation can reach more than 98%.Features of use:The installation on the construction site is suitable for any spacing of crops. PE water pipe can be buried below the ground.
Liên hệ ngay
The red adjustable flow dripper can also be called the 8-hole red little red cap dripper. The 8-hole red little red cap dripper can be adjusted to sprinkle, drip, and close. Adjust to the left to close, adjust to the right to adjust the water flow. The water outlet distance is determined according to the water supply pressure.
Liên hệ ngay
Suitable occasions: suitable for various terrain and crops, especially in irrigation area with large slope fluctuation; Suitable for the case where the laying length of drip irrigation pipe is large; Suitable for the emitter spacing changes; When the system pressure is unstable.
Liên hệ ngay
Set combination Multiple combinations can meet your various needsAOne-outlet four big straight drip arrow +current stabilizerOne 2L, 4L, 8L current stabilizerOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries Four big straight drip arrowsBOne-outlet four curved drip arrows + single hook One 4/7 to 3/5 single hookOne 3/5 five-way water separatorFour 50cm3/5PVC capillaries Four curved drip arrowsCOne-outlet four curved drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 five-way water sep
Liên hệ ngay
The pressure compensation drip irrigation pipe is made of high-density PE pipe with improved nanotechnology and built-in pressure compensation emitter. It is suitable for complex terrain and has the characteristics of good uniformity, strong anti-clogging ability and long service life.The commonly used model of pressure compensation drip irrigation pipe is Φ16. The distance between the emitters is 300mm (200), the wall thickness is 0.6mm, 0.8mm and 1.0mm.
Liên hệ ngay
Set combination Multiple combinations can meet your various needsAOne-outlet three small straight drip arrow + single hook One 4/7 to 3/5 single hookOne 3/5 four-way water separatorThree 50cm3/5PVC capillaries Three small straight drip arrowsBOne-outlet three small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 four-way water separatorThree 50cm3/5PVC capillariesThree small straight drip arrowsCOne-outlet three big straight drip arrow + single hook One 4/7 to 3/5 single hookOne 3/5 four-way&
Liên hệ ngay
Set combination Multiple combinations can meet your various needsAOne-outlet two small straight drip arrow + single hook One 4/7 to 3/5 single hookOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsBOne-outlet two small straight drip arrows + current stabilizer One 2L, 4L, 8L current stabilizerOne 3/5 three-way water separatorTwo 50cm3/5PVC capillaries Two small straight drip arrowsCOne-outlet two big straight drip arrow + single hook One 4/7 to 3/5 single hookOne 3/5 three-way
Liên hệ ngay
The built-in patch drip irrigation tape has the following characteristics:The built-in patch drip irrigation tape has many kinds of drip hole spacing for customers to choose, and can customize drip irrigation tape with different plant spacing for customers, so as to ensure that the drip irrigation tape meets the requirements of customers for all planting spacing.The outer diameter of the product is 16mm, and the wall thickness is divided into three types: 0.2/0.3/0.4mm (normal working pressure is 0.08MPa-0.1MPa, and the flow rate of emitter is 2L/h). It can b
Liên hệ ngay
Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.
Liên hệ ngay
Performance characteristics:The spraying water drop is very small, and there is no damage to the leaf surface of cropsIrrigation and cooling of crops in greenhouse, cooling and humidification of livestock houseThe cross atomizing sprinkler sprays in atomized formThe spraying diameter is 3mTechnical parameters:Working pressure (Mpa)0.22-0.28flow (Lh) 24-33spraying radius (m)1.0-1.5
Liên hệ ngay
Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsThe rotary sprinkler sprays in rain formThe spraying diameter is 6mTechnical parameters:Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.2550,60,703-4
Liên hệ ngay
Performance characteristics:The spraying water drop is small, and there is no damage to the leaf surface of cropsIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 3mTechnical parameters: Working pressure (Mpa)Flow rate (Lh)Spraying radius (m)0.1-0.240-501.2-1.5
Liên hệ ngay
Performance characteristics:The structure design is reasonable, when the water pressure is small, it can also irrigateIt is suitable for irrigation of fruit tree, shrub nursery, narrow lawn and other crops, irrigation and cooling of greenhouse cropsHalf rain and half mist form sprayed by refraction sprinklerThe spraying diameter is 6mWorking pressure (Mpa)0.1-0.25flow (Lh) 50,60,70spraying radius (m) 3-4
Liên hệ ngay
Performance characteristics:When the system pressure changes in the range of 0.05-0.35Mpa, the outflow remains unchanged, and the uniformity of irrigation can reach more than 98%; For larger trees, annular drip irrigation pipes should be installed at the outlet of the current stabilizer to ensure that the trees can be irrigated all around; the bidirectional anti-clogging design of the shunt pipe can ensure the long-term stable movement of the equipment undergroundSteady flow - small pipe outflow irrigationPressure range: 0.05-0.4Mpe; Flow specification: 10L/:20L/h.
Liên hệ ngay
Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.
Liên hệ ngay
Product introduction: the pull ring bypass switch is a common drip irrigation switch, one end of which is connected with the main water tape or PE pipe, and the other end is connected with the drip irrigation tape, so as to achieve the effect of controlling the water flow in the rear section of the valve.Instructions for use: it is mainly used for controlling the head end of the capillary (the right end of the pull ring is connected with a 16mm drip irrigation tape, which is fixed by the pull ring; The left end is connected with main water delivery pipe, which can be used for PE pipe (wal
Liên hệ ngay
Model: Φ16mmMaterial: PEProduct advantages and characteristics:1.Scientific design, compact size, light weight, good sealing and interchangeability.2.Simple structure, convenient operation, quick connection and disassembly, strong flexibility, easy to recycle, beautiful and practical.3.Stable chemical properties, excellent performance, good cold-resistance, anti-aging, long service life.4.Compact size, light weight, good sealing and interchangeability.5.It is suitable for various working conditions and widely used in various media such as gas, liquid, powder, etc.
Liên hệ ngay
When the pressure water is ejected from the nozzle of the sprinkler, it impacts the deflector through the baffle plate to make the rocker produce tangential motion force around the angle of rotation of the cantilever. Then it returns and impacts the nozzle under the action of the spring of the sprinkler to make the nozzle rotate an angle. Repeat the action, the sprinkler can rotate in full circle.
Liên hệ ngay
Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.
Liên hệ ngay
The product has many types, with the characteristics of quick and convenient connection and disassembly, good sealing performance, high strength and long service life. It is widely used in field micro -spray irrigation project.
Liên hệ ngay
Product features: scientific design, high strength, good sealing, convenient connection, easy disassembly, strong flexibility, easy recycling, and beautiful appearance. It is made of engineering plastics and has a long service life.
Liên hệ ngay
There are two types of drip irrigation tape lock-nut bypass produced by our factory, one is 12-16mm reversed lock bus bypass, the other is 16-16mm reversed lock-nut bypass. Generally, users call this kind of reversed lock-nut bypass as drip irrigation tape lock-nut bypass. 16-16mm lock-nut bypass is also called large hole lock-nut bypass or large body lock-nut bypass. Because both ends are 16mm diameter, this large hole lock-nut bypass is a kind of bypass that is more commonly used in lock-nut pipe fittings.
Liên hệ ngay